Product Power: 120W
Operating Voltage: DC12V
Power Cord Length: 3M /10FT
Maximum Pressure: 150 PSI
Power Supply Type: 12V Cigarette Lighter
Inflation Speed (Car Tyre from Flat): 4.5 Min
Continuous Working Time: 10 minutes
Pressure Gauge Accuracy: ±0.5PSI
Display Units: KPA,PSI,BAR,KG/ CM²
Instructions for use:
1.Make sure the power switch is at OFF position and the vehicle engine is running.
2.Plug the power cord into a 12V cigarette lighter socket.
3.Remove the dust cap from the tire valve, and then attach the air chuck to the tire valve stem, and screw onto tire’s valve stem.
4. Press (R) button to choose the display unit. (4 units available: PSI, KPA, BAR, KG/CM²). Press (-) or (+) button to set the desired pressure.
5. Place the compressor on the ground, turn on the power switch. The compressor will automatically stop inflating once the desired pressure is reached.
6. When the desired pressure is reached, turn OFF the power.
7. Unscrew the valve connector, place the tire valve dust cap back to the tire & disconnect the power cord from a 12V cigarette lighter socket.